Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 202 Firecrest Carbon Clincher Wheels
$950.00 - $1,150.00
The Zipp 202 Firecrest Carbon Clincher retains a classic 32mm rim depth, but with a sturdier 25.4mm rim width for all-around use. This legendary climber's companion weighs just 1,450g, and features Sapim CX Sprint spokes to optimize torsional and lateral stiffness. Laced to the maintenance-free Zipp 77/177 hubset, you can count on best-in-class durability no matter where you decide to ride. Confident stopping power comes from a combination of heat-resistant resin used in the 202's construction and Tangente Platinum Pro Evoke brake pads that provide all-conditions reliability. Zipp includes an integrated valve extender with valve-core wrench, rim tape, and quick release.
Zipp 303 Firecrest Carbon Clincher Wheel
$950.00 - $1,150.00
Zipp hits high all-around marks with their 303 Firecrest Carbon Clincher wheelset, thanks to a wide tire bed and mid-aero profile. The 28.5mm rim width provides confident control in nasty crosswinds and on rough roads, and the 45mm Firecrest rim profile offers wind-shedding aerodynamics while maintaining great acceleration characteristics. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, and trusted stopping power comes via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Zipp 404 Firecrest Carbon Clincher Wheel
$950.00 - $1,150.00
Zipp's 404 Firecrest Carbon Clincher wheelset is a testament to all-around advancement in wheel design. Its 58mm aero depth and wide profile provides proven performance in all situations, and at 1,690g (700c), you'll feel confident staying the course in less-than-ideal conditions. Whether you're looking for everyday riding performance or a race day wheelset to stay ahead of the pack, the 404 Firecrest has a great balance of weight, stability, and efficiency that complements strong riders. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, while trusted stopping power is supplied via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Zipp 808 Firecrest Carbon Front Wheel (Clincher)
$1,337.00
Searching for flat-out speed? Zipp’s 808 Firecrests are the key. They've proven to be the gold standard for road races, triathlons, and time trials across the globe. The 82mm-deep Firecrest rims are extra wide, which reduces the gap between tire and rim, creating an aero, seamless junction. The wide rims also allow wider tires run at a lower pressure, which diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting. Brilliant in cross winds and light enough to climb like mountain goats, the 808s are ideal for every type of event. They’re built on Zipp’s ultra-stiff hubs with oversize axles to ensure maximal stiffness so every ounce of power gets delivered to the road.
Zipp 404 Firecrest Carbon Rear Wheel (Clincher)
$1,498.00
Zipp’s 404s excel in every terrain. They’re exceedingly fast and agile on the flats, in cross winds, up mountains, and out of sharp criterium corners. Zipp’s 58mm-deep Firecrest rims are extra wide to minimize the gap between tire and rim, making them truly aero in every wind condition. This also allows for a wider tire run at a lower pressure, resulting in less rolling resistance, better ride feel, and a reduced chance of pinch flatting. The 404s are feather-light and built up on Zipp’s stiff hubs with oversize axles, ensuring you get every ounce of power to the road.
Zipp 808 Firecrest Carbon Rear Wheel (Clincher)
$1,638.99
Searching for flat-out speed? Zipp’s 808 Firecrests are the key. They've proven to be the gold standard for road races, triathlons, and time trials across the globe. The 82mm-deep Firecrest rims are extra wide, which reduces the gap between tire and rim, creating an aero, seamless junction. The wide rims also allow wider tires run at a lower pressure, which diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting. Brilliant in cross winds and light enough to climb like mountain goats, the 808s are ideal for every type of event. They’re built on Zipp’s ultra-stiff hubs with oversize axles to ensure maximal stiffness so every ounce of power gets delivered to the road.
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00 - $2,875.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Wheels Manufacturing Inc. Axle-03
$14.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 141mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-14
$14.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Solid Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 155mm - 1 axle per bag
WTB TCS Brass 34mm Valve Stems
$16.50
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Velox Jantex Adhesive Tubular Rim Tape
$12.00
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
Syntace X-12 Thru-Axle Axle And Mounting Parts
$8.25 - $35.00
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end - Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts
Sunlite BB Axle Nut
$1.50
- Shell: 8mm flanged axle nut - Flanged
Sunlite BB Axle Bolt
$2.50
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
Sunlite Quick Release Skewer (Rear, 168mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Replacement QR Skewer
$9.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Stan's NoTubes Tubeless Valve Stems
$8.99 - $17.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Cross Country 29er Rim Strip
$22.99
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Cyclocross Rim Strip
$24.99
Stan's Cyclocross Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Enduro Rim Strip
$30.99
Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Shimano R501-30 Wheelset
$75.99 - $162.99
When you pair high quality with big value, every rider wins. Shimano's R501 wheels use race-ready technology, but come with a privateer's price tag. They boast Shimano's trademark stiffness, low weight, and smooth feel for exceptional ride quality and fast-rolling acceleration. The R501 wheels are 8-, 9-, and 10-speed compatible and use Shimano's proven angular contact bearings for long-term durability and ease of maintenance.
Origin8 SS1101 Front Hub
$54.99 - $65.98
Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling
Origin8 SS1101 Rear Fix/Freewheel Single-Speed Hub
$64.99
• Sealed cartridge bearings • High flange design • 120mm hub spacing • Aluminum hub body • Lightweight, hollow, heat-treated axle • Fix/freewheel hub threading • 32 and 26-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, or white
Mavic 12 > 9.5mm Rear Axle Adapters
$7.90
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. - Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts - Requires one pair per hub
Mavic 15mm Front Axle Adapter - Crossmax ST/SX
$9.90
On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use a 15mm axle - One pair of adapters required for each hub to be converted
Mavic UST Rounded Valve
$14.99
- UST compliant tubeless valve with removable valve core for easy sealant installation. - Mavic recommends that UST valves must be changed once a year to ensure the sealing of the UST systems. Two versions are available: - Round stem compatible with 2012 and beyond Crossmax SLR, ST and SX and 2013 Crosstrail, and: -Square stem for older wheel versions
Mavic 135 > 142mm Rear Axle Adapters - Crossride
$16.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic Crossride rear hubs with 135mm spacing to fit frames with dropouts spacing of 142mm - One pair of adapters required for each hub to be converted
Mavic 135 > 142mm Rear Axle Adapters - Crossmax
$29.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Crossmax rear wheels from 135mm to 142mm spacing - One pair required for each hub to be converted
Mavic Crossmax SLR 29 Front Wheel
$469.95
Light, stiff and proven in World Cup competition, Mavic's Crossmax SLR 29s are perfect for XC racers and weekend warriors alike. For maximum strength and lightness they boast Mavic's Maxtal aluminum rims, which feature Mavic's ISM (Inter Spoke Milling) 3D technology which significantly reduces the weight. Boosting the strength and keeping the weight as low as possible are Mavic's straight-pull Zicral aluminum spokes and nipples. Plus, these sweet wheels sport Mavic's efficient QRM+ hubs that have serviceable and durable sealed-cartridge bearings and aluminum axles for more gram savings and strength. These wheels are compatible with UST tubeless and regular tires and tubes, too.
Page 1 of 3 Next page